Thixotropic polymer adhesive for tiles Teknofay 200 (D2TE) pasty, white, 5 kg TEKNO

456

uah / bucket

Ready-to-use TEKNOFAY 200 adhesive, a paste-like type with high performance characteristics based on an emulsion polymer with extended working time. It is used for gluing ceramic tiles and mosaics with high moisture absorption on walls, floors, ceilings inside and outside premises. It is especially recommended for elastic bases and bases subject to deformation. It is ideal for arranging bases in places with high humidity, except for tanks that are constantly filled with water.

It is used for tiling:

Walls and floors of bathrooms and showers
Wooden surfaces (provided they are stable to moisture, for example, water-resistant plywood is well glued) lime plasters and bases
Walls made of precast or monolithic concrete
Gypsum plasters or substrates
Drywall
Painted wall surfaces (provided that the paint is stable and the tiles are adsorbed)
Existing ceramic tiles (provided that one of the surfaces is adsorbed)
Large tile floor and walls
Insulation material on top of plasters
Ceramic tiles on top of heated screeds

Features and Benefits:

Long working time with the mixture
Elastic
Does not have an unpleasant smell
It does not slip on vertical surfaces
The humidity level does not affect the operation

Instructions for use

Surface Quality:

The application surface must be cleaned of materials that prevent adhesion, such as dust, oil, resin and detergent. Weak parts should be dismantled and the surface cleaned with compressed air.
The material should be mixed before use.
In order to strengthen the adhesion, the glue should be distributed over the surface with the flat part of the spatula, and then run over it with the toothed part of the spatula, selected according to the size of the tile, in one direction.
The tile should be attached to the mortar for 30 minutes, preferably using a rubber hammer. This period can be shortened in case of unsuitable environmental conditions, such as high temperature, strong wind or low humidity.
If the glue application time has expired, the glue is scraped off the surface and a new layer is applied. To test it, fingers are pressed on a surface coated with TEKNOFAY 200. If the glue sticks to the fingers, the gluing can be continued. If the fingers are clean, it means that the time for applying the glue has passed.

Storage conditions: The material should be stored in its original closed packaging at a temperature of 5°C to 23 °C and away from direct sunlight, in a cool, dry place protected from freezing.

Packing: 5 kg. plastic bucket.

Restrictions and special conditions:

When applied to painted surfaces, check the stability of the paint, remove the swollen parts.
When applying tiles with low water absorption, such as granite, preference should be given to the adhesive solution Teknofay EX or Teknofay Flex.
The packaging should be tightly closed when not in use.
Hands and tools should be rinsed with plenty of water after application. Surfaces should be cleaned with a damp cloth.
Avoid direct contact of tiles glued with Teknofay 200 with water for at least 10 days.
When applying ceramics to old ceramics, the drying time of the product can be 1-2 weeks, depending on environmental conditions and the size of the ceramics.

Name	Meaning
Colour	White
Packaging	Plastic bucket 5 kg
Storage conditions	12 months in a dry environment in the closed original packaging
Adhesion	≥ 0.5 N/mm²
Sliding	≤ 0.5 mm
Mashing of seams	24 - 48 hours
Expenditure	1.5 - 2 kg/m²
Lifetime	30 min
Application temperature	+5°С...+35°С
Operating temperature	-30°C...+80°C
Shear strength of the clutch
- initial value (after 28 days)	≥1 N/mm²
- after exposure to heat	≥1 N/mm²
- after immersion in water	≥0.5 N/mm²
- after exposure to elevated temperatures	≥1 N/mm²