Reinforcement retainer flooring protective layer 70-80 mm, 50 pcs. Sanpol

uah / pack.

The floor retainer is 70-80 mm for fittings for use in a horizontal position on soft bases (mineral wool, crushed stone, foam or sand), and will also provide a protective layer from 70 to 80 mm. Suitable for fittings with a diameter of 4-16 mm. The clamps are designed for fittings with a diameter of 8-16 millimeters. Typically, 5 to 10 fasteners per square meter are used. For reliable fixation of the reinforcement, it is recommended to use from 5 to 10 fasteners per square meter. The smaller the diameter of the armature, the more retainers are used.

Main Features:Purpose of the fixator:

For loose soil
Type of retainer: flooring
Retainer Material: Plastic
Thickness of the protective layer: 70-80 mm
Minimum diameter of the armature: 6 mm
Maximum diameter of the armature: 16 mm
Working position: Horizontal
Packing: Pack
Package Quantity: 50 pcs

The 70-80 mm flooring retainer is a reliable fixture for fittings, which provides a protective layer from 70 to 80 mm!

Concrete reinforcement is one of the most important stages in the process of manufacturing concrete structures. To ensure greater structural strength, rebar retainers are used, installed before pouring concrete on or under the rebar. The clamps allow you to place the reinforcement at the right distance from the base and the walls of the formwork, A reliable attachment for the reinforcement, which provides a protective layer from 70 to 80 mm. The flooring protective layer retainer is used to install a horizontal layer of reinforcement on a loose base, soils, crushed stone, sand. Also for installation on membranes and films, thanks to the increased area of the base.

Packaging of 50 pcs. in the package. Consumption from 4 to 6 pcs / m2.

Purpose of the fixator: For loose soils
Type of retainer: flooring
Retainer Material: Plastic
Thickness of the protective layer: 70-80 mm
Minimum diameter of the armature: 6 mm
Maximum diameter of the armature: 16 mm
Working position: Horizontal
Packing: Pack
Package Quantity: 50 pcs

What is the difference between Flooring and Universal clamps?

For the horizontal arrangement of fittings in the construction of foundations, industrial floors, floor slabs, "flooring" fixators are used. It is important to take into account that the "flooring" fixators are used when installing concrete filler floors on crushed stone and non–solid or loose surfaces - sand, polystyrene, cotton wool. Also for installation on membranes and films due to the increased base area, which does not damage the surface.

The "universal" or "rack" retainer is used for the device of a horizontal protective layer on a solid base – concrete, plywood.

Unfortunately there are no reviews yet. But you can fix it!