Product code: 100005963
Manufacture`s article: PR0002670.100
Reinforcement clamp universal rack, protective layer 10-15 mm, 100 pcs. Sanpol
The universal 10-15 mm stand retainer is used to fix the reinforcement in a horizontal position when installing floor slabs, screed, industrial floors and other architectural solutions. The retainer of the protective layer is used to install a horizontal layer of concrete reinforcement or on any other rigid base. The special design of the retainer distributes the load over the entire area of the product, which in turn provides greater reliability under the pressure of the reinforcement frame. The universal retainer is used for fittings with a diameter from 4 to 12 mm and provides a protective layer from 10 to 15 mm.
Main Features:Recommended consumption from 4 to 6 pcs/m2
- Purpose of the retainer: For overlaps
- Type of retainer: Rack
- Retainer Material: Plastic
- Thickness of the protective layer: 10 mm
- Minimum armature diameter: 4 mm
- Maximum diameter of the armature: 12 mm
- Working position: Horizontal
- Quantity in the package: 100 pcs
The universal 10-15 mm stand retainer is used to fix the reinforcement in a horizontal position when installing floor slabs, screed, industrial floors and other architectural solutions.
The retainer of the protective layer is used to install a horizontal layer of concrete reinforcement or on any other rigid base. The special design of the retainer distributes the load over the entire area of the product, which in turn provides greater reliability under the pressure of the reinforcement frame.
The universal retainer is used for fittings with a diameter from 4 to 16 mm and provides a protective layer from 10 to 15 mm.
Made of plastic, packing 500 pcs. in the package. The recommended consumption is from 4 to 6 pcs/m2.
Recommended consumption 4 - 6 pcs/m2
Type of retainer: Rack
Retainer Material: Plastic
Thickness of the protective layer:10-15 mm
Minimum armature diameter: 6mm
The maximum diameter of the armature: 12mm
Working position: Horizontal
Package quantity: 100 pieces
How to choose the correct height of the latch?
Retainers for reinforcement – allow you to achieve maximum strength and reliability of the supporting frame, contribute to pouring the exact thickness of the protective concrete layer between the formwork panels and the reinforcement mesh. The clamps allow you to place the reinforcement at the right distance from the base and the walls of the formwork. The height of the clamps is selected based on 1/3 of the height of the protective layer.
What is concrete cover?
The protective layer of concrete is the distance from the outer face of the reinforced concrete element to the nearest reinforcing bar. The thickness of the protective layer of concrete should be selected, taking into account the purpose of reinforcement in structures. The working or constructive role of the reinforcement is taken into account; the type of structure (for example, a column, slab, beam, foundation element or wall); the diameter and type of reinforcement. This is due to the fact that too thin a layer will not fully perform its functions, and too thick a layer will negatively affect the reinforced frame and lead to increased costs.
Additional products
Other products in the category
Useful articles
