Chiroz is a spring clamp on the armature, which allows you to quickly fasten the formwork of vertical structures and takes a load of up to 2 tons. Allows you to abandon or significantly reduce the use of tie screws, nuts for formwork and clamps. For convenience, it is recommended to use a pressure wrench for chiroz. The spring clamp is easy to use, significantly saves time when assembling and disassembling the formwork of foundations, monolithic belts, column walls and concrete stairs.
Advantages:
Advantages of spring clamp:
Chiroz is a spring clamp on the armature, which allows you to fasten the formwork panels and can withstand a load of up to 2 tons. Suitable for fittings from 6 to 10 mm. Allows you to abandon or significantly reduce the use of tie screws, nuts for formwork and clamps. For convenience, it is recommended to use a pressure wrench for chiroz.The spring clamp is easy to use, significantly saves time when assembling and disassembling the formwork of foundations, monolithic belts, column walls and concrete stairs.
Recommendations for use:
To install the spring clamp, it is necessary to bring the ends of the reinforcement to the outer side of the formwork panel to a length of about 15 cm and tighten with a clamping key for the chiroz. At the end of the work, removing the chiroz and dismantling the formwork, it is necessary to cut off the ends of the reinforcement.
Advantages of chiroz spring clamps:
As a result, spring clamps "chiroz" is an innovative and convenient solution for construction, which combines high efficiency, reliability and economy. They allow builders to easily create formwork, ensuring the accuracy and quality of concrete structures. As a result, the use of spring clamps "chiroz" becomes an indispensable assistant for builders who strive for optimal results and improvement of work processes.
Step-by-step instructions on how to make a formwork
"Chiroz" is a special spring clamp that is used to fasten the formwork elements.
Here is a step-by-step instruction on how to make a formwork using "chiroz" clamps:
It is important to remember that when working with the formwork and "chiroz" clamps, safety rules must be observed.
Работаем на стройке, и эти зажимы для опалубки стали настоящим спасением. Очень удобные и эффективные. Теперь у нас все идет гораздо гладче. Большое спасибо продавцу!
дійсно легкі у використанні зажими для опалубки, дуже просто закріплюються на опалубочних досках і миттєво знімаються, що значно економить час
Раджу пружинні зажими всім професіоналам і аматорам будівництва, які шукають ефективний і зручний інструмент для роботи з опалубкою ти більше якщо ви робите опалубку своіми руками.
Хочу поділитись своїм позитивним враженням від використання пружинних зажимів для опалубки "чироз". Ці зажими виявилися дійсно незамінними помічниками під час будівництва. Дякую, за швидку доставку, та знижечку)
Дякуємо і Вам)
Wholesale department phone numbers
Or send a request and we will contact you shortly: