Pool waterproofing
One of the main "roles" in the construction of a concrete pool is played by waterproofing, in particular when facing with tiles or mosaics, it serves not only as a barrier to prevent water leakage, but also as a separating layer that does not allow large deformation loads on the cladding. With all the variety of waterproofing technologies, as well as a large number of manufacturers, at first glance, the question: "What is the best waterproofing for a swimming pool?" is very difficult to answer. But we will try!
First of all, it is necessary to determine by what criteria we can call waterproofing the best, what technical and other characteristics it should have.
To do this, let's turn to the main technical characteristics of waterproofing recommended for the pool, which are indicated by manufacturers:
water-repellent properties - elasticity
- tensile strength
- adhesion
- resistance to aggressive environments
- application and operation temperature
- drying time and complete polymerization
- influence of atmospheric conditions
And also do not forget about such important factors as:ease of application
- durability of the material
- versatility - the ability to comprehensively solve a wide range of tasks
- compliance with European and international standards
- manufacturer's warranty
We offer you to take a closer look at the overview of high-quality waterproofing materials that provide effective protection of swimming pools, both from the outside and from the outside.
Let's start with the materials that are used for waterproofing inside the pool bowl:Teknomer 300EX is a one–component waterproofing material with increased elasticity based on acrylic resin for tiles, ceramics and other facing materials.
- Color - white
- Packing – 3kg/20kg bucket
- Consumption – 1.5 kg/m2 with a thickness of 1 mm
Teknomer 200EX is a two-component elastic waterproofing based on special cements, mineral fillers, additives and polymer emulsion. Forms an elastic coating that protects the surface from water penetration and has high adhesion to most construction surfaces.
- Color - gray
- Packing – 30 kg set (20 kg bag 10 kg metal container)
- Consumption – up to 1.5 kg per m2 in one layer.
Teknomer 200EX Crystallize is an elastic polymer-cement waterproofing of deep penetration for concrete. Forms a seamless elastic waterproofing coating. Creates protection against leaks and penetration of surface water. It is used at negative and poly-positive water pressure. It consists of a powder component based on cement, a liquid component based on acrylic and special additives that increase the water resistance and workability of the application surface.
- Color - gray
- Packaging – 35 kg set (25 kg bag 10 kg metal container)
- Consumption – up to 1.5 kg per m2 in one layer.
Materials for waterproofing the pool bowl from the outside:Izoplast B is a bitumen mastic for waterproofing based on an organic solvent with special additives and has high penetrating properties.
- Color - black
- Packing – 24 kg bucket
- Consumption – 1.5 kg per m2 in two layers
Izoplast Dysperbent is a water-based bitumen-rubber mastic modified with synthetic rubber to create a seamless waterproofing coating. It is resistant to weak acids and salts. It can be used as a bitumen-rubber primer, diluted with water 1:1.
- Color - black
- Packing – 20 kg bucket
- Consumption – 1.5 kg per m2 in two layers.
Careful waterproofing of the pool bowl both from the outside and from the inside guarantees the protection of concrete, as well as maintaining its operational reliability for a long time.
