Elastic polymer-cement waterproofing Teknomer 200 EX with high resistance to positive water pressure, 20kg + 10l TEKNO

3 762

uah / set

Teknomer 200 EX is an elastic two-component waterproofing material based on cement, a liquid component based on acrylic and special additives. Forms a seamless elastic waterproofing coating. Creates protection against leaks and penetration of surface water.

Where it is used:

foundations of buildings
tunnels and elevator shafts
ground floors, basements, balconies
baths, saunas, swimming pools and water tanks
showers and bathrooms
engineering structures (metro, tunnels, dams, highways)

Advantages:

can be applied manually or by spray
does not shrink and crack
can be applied to fresh screed and concrete surfaces
prevents carbonation in concrete.
non-toxic, suitable for indoor use and drinking water tanks
may come into contact with saltwater

Recommendations for use

Care must be taken not to damage the insulating material during the coating process.
Do not apply on surfaces made of wood, metal, as well as fiberboard, MDF, plywood, PVC.
Do not add other ingredients to the mixture.
To achieve maximum protective characteristics, subsequent work on the surface should be carried out no earlier than 72 hours.
After application, the surface should be protected from direct sunlight, strong wind, high (above 35 °C) and negative temperatures and precipitation.
The equipment should be rinsed with water immediately after application. After the product hardens, it can be cleaned only by mechanical methods.

Instructions for use

Teknomer 200 EX after thorough kneading for 3-5 minutes is applied to a water-soaked surface with a brush or spatula. After applying the first layer of the material, the second layer is applied in the vertical direction of applying the 1st layer.

Composition of the material	Component A: grey powder Component B: white liquid
Packaging	30 kg (A B)
Expiration date	12 months in a dry environment in a closed package
Pot life time of the mixture	6 hours
Time of application of the second layer	5-6 hours
Density of the mixture	1.8 kg/l
Commissioning	3-7 days
Adhesion strength	1 N/mm²
Penetration into cracks	2.5 mm
Waterproofness	7 Bar (positive)
Thermal stability	-40°C...+80°C

How to make basement waterproofing from groundwater?

Waterproofing of the basement from the inside from groundwater is carried out with the help of special materials capable of penetrating into the structure of concrete or brick. Teknomer 200EX is one of such materials. It consists of a powder component based on cement and a liquid component based on acrylic and special additives that increase the water resistance and workability of the application surface. The material is quite elastic.

Why is floor waterproofing necessary?

Waterproofing of the floor is a responsible part in the overall protection of the building from the destructive effects of moisture. Teknomer 200EX elastic polymer-cement waterproofing based on cement and acrylic with special additives is suitable for waterproofing the floor. It is used inside and outside structures made of porous materials. Suitable for horizontal and vertical surfaces.

How to apply elastic waterproofing?

Elastic polymer-cement waterproofing is applied to the surface with a brush or a spatula in several layers, and the second layer should be applied perpendicular to the previous one.

Commissioning is possible no earlier than 3-7 days after the application of the material, depending on the temperature and humidity of the environment.

Teknomer 200 EX forms a seamless elastic waterproofing coating, and creates protection against leaks and penetration of surface water.

Unfortunately there are no reviews yet. But you can fix it!