Bathtub waterproofing Izoplast FH Special, 4 kg ADW

Izoplast FH Special is an acrylic waterproofing membrane based on the aqueous dispersion of polymers. Waterproofing inside rooms with high humidity for tile materials.

Scope of application:

• Suitable for all mineral substrates (concrete, plaster, aerated concrete, brick)
• Suitable for plasterboard and OSB boards
• It can be used in combination with thermal insulation materials
• To create a moisture-proof layer for tile materials
• To create waterproofing before laying floor coverings (wood, plastic, linoleum)

Advantages:

• One-component material, ready for use
• Does not contain solvents
• Creates a protective membrane on the application surface

Instructions for use:

The surface must be smooth, free of dust, dirt, oils and other substances. Before applying, the surface must be primed with Izoplast E Nano Power. Mix before use.

The product can be applied using a pneumatic sprayer, a roofing brush, a brush or a spatula in two or three layers. Apply the first layer by carefully rubbing into the base. Apply the layers perpendicular to each other after the previous layer has completely dried ( 3-4 hours at a temperature of +20 °C).

Application Notes/Restrictions:

Observe the safety and health regulations during the work. Use protective gloves, clothing, glasses. In case of contact with the skin, rinse with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor.