Teknomer PVC elastic tape for waterproofing joints 120/70 mm TEKNO

474

uah / roll.

Elastic tape for waterproofing Teknomer PVC Champer Tapes for sealing construction seams based on polyester mesh 120/70. Allows you to protect the structure from water penetration during the formation of cracks up to 7mm wide.

Where it is used:

Vertical and horizontal construction seams
Waterproofing in structures with high humidity (balconies, terraces, swimming pools, water tanks, bathrooms and toilets)
Installation of pipes and intake systems
Waterproofing of cold seams and cracks.

Advantages:

Easy to use
High adhesion to concrete surfaces
High tensile, impact and bending strength
Chemical resistance
Polyester mesh additionally reinforces the waterproofing solution on the surface

Instructions for use:

The application surface must be cleaned of dust, oil, paint, silicone and other materials that may interfere with adhesion.

Application Notes / Restrictions:

Prepare and cut off the required amount of tape and prepare the necessary waterproofing solution.
After applying the first layer of waterproofing solution to the surface, lay the insulation tape cold, angular, horizontal-vertical joints and dynamic cracks. Thus, continuous waterproofing is provided. After that, a second layer of waterproofing material must be applied to the tape.
After applying the solution, the surface must be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above 35 °C), rain and frost.

Appearance	Grey roll with white edges
Packaging	Roll
Expiration date	24 months
Length	10 meters
Width	120mm (70mm TPE insert)
Thickness	0.52 mm
Weight	35 g/m
Longitudinal stretching	< 26%
Transverse stretching	< 123%
Pressure to rupture	3 Bar (positive)
Waterproofing	1.5 Bar
UV protection	> 500 hours
Operating temperature	-30°C to +90°C