Elastic one-component polyurethane sealant Hydroflex 40FC for seams, 600 ml. Arfen

230

uah / PCS.

HYDROFLEX 40 FC is a one–component high-modulus polyurethane sealant that gains strength under the influence of atmospheric humidity. It has excellent adhesion to concrete, metal, ceramics, wood, etc.

FEATURES AND BENEFITS:

Fast curing
Strong adhesion
Permanently elastic
Thixotropic
Does not absorb dirt
Without shrinkage
Easy to apply and smooth out
It is being painted

APPLICATION:

Expansion joints between different structural materials
Sealing of joints in the automotive industry
Sealing and bonding of ventilation ducts, gutters, spouts, etc.
Sealing of sheet metal joints
To reduce vibration in all types of sheet metal installation work
Sealing against water, air, gas and dust.

STANDARDS:

Meets or exceeds the requirements of the following standards:

Requirements of specifications for the content of VOC LEED EQc4.1 "Low emission products" Regulations 1168 SCAQMD.
French VOC requirements for Class A
CE marking for facade elements.

LIMITATION:

It cannot be used in completely sealed rooms where the sealant cannot harden due to the lack of atmospheric moisture.
Do not use it where prolonged immersion in water is possible.
Do not apply on frozen or wet surfaces or through standing water.
Prolonged exposure to direct sunlight may cause discoloration.
Avoid application at temperatures below 5°C and above 40°C.

STORAGE AND SHELF LIFE:

12 months when stored in the original packaging, away from direct sunlight and moisture, at a temperature of 10 C to 25 C

features

PRODUCT BEFORE CONFIRMATION:

Footing	Polyurethane
Consistency	Thixotropic
Curing mechanism	Moisture absorption
Density	1.08 ± 0.03 g/ml
Film formation time	40 ± 10 min. (23C and 50% relative humidity)
Curing speed	3 mm/day (23 C and 50% humidity)
Shrinkage	0 mm (EN ISO 7390)
Heat resistance	-40 C to 90 Co
Application temperature	vid 5 C to 40
Shore A hardness	50± 5 After 28 days (ISO 868)
Possibility of coloring*	Yes
Elongation at break	≥00 (ISO 37)
Tensile strength	Min. 2,5 N/mm (ISO 37)
Manufacturer	Turkey