Product code: 100005961
Manufacture`s article: 0000o1328
Reinforcement retainer flooring protective layer 55-65 mm, 50 pcs. Sanpol
The 55-65 mm flooring retainer is a reliable fixture for fittings, which provides a protective layer from 55 to 65 mm. Lock of the protective layer Flooring 55-65 is used to install a horizontal layer of reinforcement on a loose foundation, soils, crushed stone, sand. Also for installation on membranes and films, thanks to the increased area of the base. The clamps are designed for fittings with a diameter of 8-16 millimeters. Typically, 5 to 10 fasteners per square meter are used. For reliable fixation of the reinforcement, it is recommended to use from 5 to 10 fasteners per square meter. The smaller the diameter of the armature, the more retainers are used.
Main Features:Purpose of the retainer: For loose soils
- Type of retainer: flooring
- Retainer Material: Plastic
- Thickness of the protective layer: 55-65 mm
- Minimum armature diameter: 6 mm
- Maximum diameter of the armature: 16 mm
- Working position: Horizontal
- Packing: Pack
- Packaging: 50 pcs. in the package.
- Recommended consumption: from 4 to 6 pcs/m2.
Rebar retainer flooring 55-65 mm is a reliable fixture for rebar, which provides a protective layer from 55 to 65 mm.
Concrete reinforcement is one of the most important stages in the process of manufacturing concrete structures. To ensure greater structural strength, rebar retainers are used, installed before pouring concrete on or under the rebar. The clamps allow you to place the reinforcement at the right distance from the base and the walls of the formwork, A reliable attachment for the reinforcement, which provides a protective layer from 55 to 65 mm. The flooring protective layer retainer is used to install a horizontal layer of reinforcement on a loose base, soils, crushed stone, sand. Also for installation on membranes and films, thanks to the increased area of the base.
Packaging of 50 pcs. in the package. The recommended consumption is from 4 to 6 pcs/m2.
Purpose of the fixator: For loose soils
Type of retainer: flooring
Retainer Material: Plastic
Thickness of the protective layer: 55-65 mm
Minimum armature diameter: 6 mm
Maximum diameter of the armature: 16 mm
Working position: Horizontal
Packing: Pack
Packaging: 50 pcs. in the package.
Recommended consumption: from 4 to 6 pcs/m2.
How to choose the correct height of the latch?
Retainers for reinforcement – allow you to achieve maximum strength and reliability of the supporting frame, contribute to pouring the exact thickness of the protective concrete layer between the formwork panels and the reinforcement mesh. The clamps allow you to place the reinforcement at the right distance from the base and the walls of the formwork. The height of the clamps is selected based on 1/3 of the height of the protective layer.
How thick should the protective layer be?
The parameters of the protective layer are clearly regulated by the norms:
- at standard or low humidity in the room, the thickness of the protective layer of concrete should not be less than 20 mm.
- in case of high humidity inside the structures, the concrete thickness should be at least 25 mm.
- during the construction of buildings, the reinforced concrete parts of which go out into the open atmosphere, the protective layer of concrete should be 30 – 40 mm.
- for floors up to 250 mm thick, the concrete layer must be at least 12 mm. This value varies depending on the diameter of the valve. For overlaps of greater thickness, the thickness of the formation increases by 5 mm;
- the part of the structure placed in the ground without the use of additional protection should be covered with a layer of concrete from 40 to 76 mm.
- for foundations, a layer thickness of at least 40 mm is provided.
Additional products
Other products in the category
Useful articles
