Product code: 100006879
Plasticizer for all types of concrete SANPOL-7, 1l Sanpol
Plasticizer for all types of concrete SANPOL-7 is a complex additive for concrete and mortar mixtures, based on polycarboxylate. The additive has a plasticizing and water-reducing effect, as well as the effect of slowing down the hydration of cement in the early stages of hardening of the concrete mixture and accelerating the hardening of concrete. Allows to obtain cast concrete mixtures without delamination and water separation. The composition of the additive is adapted to domestic aggregates and cements, including those made of slag, with a slag content of up to 80%.
The supplement allows you to:
- increase the workability of concrete and mortar mixtures from P1 to P4;
- to increase the early (by 10-25%) grade strength of concrete (with constant workability);
- reduce the water demand of the concrete/mortar mix by 10-20%;
- get mobile mixtures stacked without vibration;
- increase the survivability of the concrete mix up to 1.5 - 2 hours, depending on the quality of the materials used, manufacturing conditions and transportation.
Plasticizer for all types of concrete SANPOL-7 is used to improve and regulate the properties of reinforced and non-reinforced concrete, mortar, dry building mixes. The main effect of using the additive is to increase the mobility of the concrete mixture with the preservation of the strength characteristics of concrete after solidification. The use of a plasticizer allows you to reduce the amount of water for the preparation of the solution.Basic properties:
Versatility of application
- Increases the strength of the concrete mix
- Contains a metal corrosion inhibitor
- Plasticization 10-15%
Type: Plasticizer
Country of origin : Ukraine
Appointment: for concrete, mortar
Colour: brown
Additional information: consumption per 50 kg of cement 0.250-0.500 ml per 50 kg of cement by dry matter
Packaging: 1 l bottle
What is the consumption of the additive?
The consumption of the additive depends on the mineral composition of the cement, the characteristics of the filler and the purpose
The additive is dosed from 0.500 to 1.0 liters per 100 kg of cement
The work is carried out at a base and ambient temperature from 5 to 35 ° C.
The additive should not be introduced into dry components.
Enter into the concrete mixture simultaneously with the kneading water.
Distribute the additive evenly by stirring.
Other products in the category
Useful articles
