Cement mixture corrosion inhibitor Tekno AD, 20 kg TEKNO

510

uah / bag

Tekno Ad is a special cement mixture that promotes the adhesion of old concrete surfaces with new ones, contains corrosion inhibitors.

Where it is used:

in large engineering structures (metro, motorway, tunnel, dam)
when repairing and strengthening concrete surfaces
to prevent corrosion in reinforced concrete structures

Advantages:

it has high mechanical strength
it has high adhesion to concrete and reinforcement
protects the armature from moisture
easy to apply
non-toxic

Recommendations for use:

do not add other components to the solution
after application, the surface must be protected from the effects of adverse weather conditions and air temperatures above 35^°C
after use, the equipment must be cleaned immediately after use
may cause skin irritation, use protective gloves, goggles and masks while working.

Instructions for use:

The surface for application must be cleaned of any kind of oil, rust, detergents and other substances that prevent setting. Before applying, the surface must be moistened.

Mixing is carried out using a low-speed mixer, gradually adding the mixture to a container with water for 5 minutes, soak the solution for 3 minutes and mix again until a homogeneous mixture is obtained. It can be applied to the surface using a roller or an automatic sprayer. It is necessary to use the solution within an hour.

Colour	Gray
Packaging	20 kg bag
Expiration date	6 months in a dry environment in a closed package
Consumption (as a solution)	1.6 – 2 kg/m²
Consumption (for corrosion protection)	2 kg/m2 (1 layer)
Viability of the mixture	60-90 min .
Fraction diameter	< 1mm
Compressive strength	65.0 N/mm²
Flexural strength	8 N/mm²
Adhesion	2 N/mm²