Product code: 100005685

Epoxy paint Teknobond 600 TEKNO

515

uah / kg

Teknobond 600 is an epoxy paint resistant to aggressive conditions and chemicals. It can be applied to concrete, metal, wood, plaster surfaces.

To obtain a textured surface, use Teknobond 600 TIX.

Where it is used:

Indoors and outdoors.
For any surfaces where chemicals can be used.
In food factories, laboratories (especially in areas with high humidity).
It is used to cover materials such as parquet, tiles, ceramics, granite, mosaic, porcelain, glass.
Suitable for walls, ceilings and floors.

Features and Benefits:

Waterproof
Resistant to chemicals and bacteria.
Resistant to frost.
High strength and durable.

Instructions for use:

The application surfaces must be strong, clean, dry and free of foreign substances. The surfaces should be as smooth as possible, free from cracks and other damage. If there are areas in the form of cracks, cavities on the surface - they should be repaired with the help of convenient cement mixtures Teknorep 300 and Teknorep 300EX.

After adding component B to component A, mix for 2-3 minutes using a low-speed electric mixer (maximum 400 rpm) until a homogeneous mixture is obtained.

Cleaning of equipment. Immediately after application, the equipment must be cleaned with Tekno solvent.

Application notes/Limitations:

For the highest quality curing of the material, do not use boundary temperature conditions. Low temperatures slow down the curing process, while high temperatures speed up the curing process. The viability will also vary depending on the temperature.
After application, the application surface must be protected from direct sunlight, strong wind and high air temperature (above 35 °C).
If the mixture gets on the skin, it should be washed with water and detergent. In case of contact with eyes, rinse with plenty of warm water and seek medical help.

Colour	According to the RAL palette
Density of the mixture	1.54±0.02 g/ml
Expiration date	12 months in the closed original packaging
Packaging	5 – 20 kg set
Expenditure	0.250 – 0.300 kg/m²(per layer)
Viability of the mixture	40 min (depends on weather conditions)
Proportions of the mixture	4.5 parts A: 1 parts B (by weight)
Bond strength with concrete	> 4 H/mm² (TS EN 4624)
Full cure	7 days