Product code: 100006887
Plasticizer for underfloor heating SANPOL TP-6, 1l Sanpol
Plasticizer for underfloor heating SANPOL TP-6 is designed for the manufacture of monolithic structures and concrete products, which are subject to increased requirements for water resistance, frost resistance, chemical resistance. It has a plasticizing, hydrophobic effect, compacts the structure of concrete. The composition of the additive is adapted to conventional aggregates and cements, including slag-alkaline ones.
Application of the additive:
- ready-mixed concrete for the manufacture of massive, densely reinforced and especially important structures
- road, hydraulic, chemical resistant concrete
- high-strength concrete
- underfloor heating
Plasticizer for underfloor heating SANPOL TP-6 is designed for the manufacture of monolithic structures and concrete products, which are subject to increased requirements for water resistance, frost resistance, chemical resistance. It has a plasticizing, hydrophobic effect, compacts the structure of concrete. The composition of the additive is adapted to conventional aggregates and cements, including slag-alkaline ones.
Main advantages:0
- increases the water resistance and durability of concrete
- removes air bubbles from the concrete mortar
- increases the plasticity and uniformity of the concrete mix
- prevents cracking and reduces the possibility of shrinkage
- prevents corrosion on heating elements and fittings
- improves thermal conductivity and creates uniform heat distribution over the entire surface
- reduces water consumption by 15-20%
- reduces cement consumption by 10-20% without reducing brand strength
Type: Plasticizer
Country of origin : Ukraine
Appointment: for concrete, mortar
Colour: brown
Additional information: consumption per 50 kg of cement 0.250-0.500 ml per 50 kg of cement by dry matter
Packaging: 1 l canister
How to use plasticizer for underfloor heating SANPOL TP-6?
The work is carried out at a base and ambient temperature ranging from 5 ° C to 35 ° C. To introduce SANPOL TP-6 plasticizer for underfloor heating into the concrete mixture simultaneously with the kneading water. Ensure uniform distribution of the additive by mixing.
Do not inject plasticizer into dry components!
Dosage:(0.25-0.5) liters per 50 kg of cement or 0.6 - 1% of the cement weight by dry matter, depending on the mineral composition of the cement, the characteristics of the filler and the purpose.
Other products in the category
Have you already watched
Shower drain LIBRA 10x10 cm, stainless steel, vertical, with dry shutter, tile grate
Useful articles
