Liquid hardener for concrete Teknoser LI (Lithium) 30 kg TEKNO

20 784

uah / pack.

Teknoser Lityum is a penetrating liquid hardener for mineral surfaces based on lithium silicate.

Scope of application:

For industrial floors
For storage facilities
For warehouses with low temperatures
For external and internal parking
For hangars for airplanes and turntables
For berths

Features and Benefits:

Increases the strength of concrete due to crystals that penetrate deep into the pores
Increases the impermeability of concrete
Increases the wear resistance of the surface
Eliminates the formation of dust from coated surfaces
Prevents cracking
Prevents the destruction of the surface at low temperatures
Vapor permeable
Creates a glossy finish
Does not require a finishing coat

Instructions for use:

Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting. The surface must be dry, firm and durable, without water leaks.

The quality of concrete should be from 20/25;

The quality of the screed is from EN 13813 CT-C25-F4.

Freshly laid concrete does not require special preparation.
Before applying the material, the surface should be moistened.
Teknoser Lityum should be applied to fresh concrete or screed using a spray gun in one layer, filling the pores of the surface. The material should be spread over the surface with a fibrous brush or a spatula.

Application Notes/Limitations:

It should be avoided in windy, extremely cold and rainy weather.
The surface hardener may vary in shades depending on the type of concrete surface on which the mixture is applied.
Acid cleaners should not be used.
Regular washing of the surface increases its wear resistance.
The tools and equipment used must be washed immediately after use.

Expiration date	12 months in a dry environment in a sealed package
Packaging	Bucket 30 kg
Density of the mixture (En ISP 2811-1)	1.10 g / cm2
Application temperature	+2 °C - +38 °C
Expenditure	0.05 - 0.1 l/m2
Time of rejection	4 - 6 hours
Commissioning time	7 days