Product code: 100005680

Teknocila 400 water-based varnish TEKNO

3 150

uah / bucket

Teknocila 400 — is a highly effective protection of the white surface on a water-acrylic basis, was specially developed as the top layer of the lacquer material.

Where it is used:

As a protection on some decorative floor and wall coverings.
Alternatively, in places where the use of concrete polishes with solvent is not required.

Features and Benefits:

Prolongs the service life of concrete coatings.
Waterproof.
Resistant to many oils and chemical elements.
Increases the wear resistance of the surface.
One-component.
It does not contain solvents.
It is used as a varnish due to the formation of a bright film layer.
Cleaning can be done with water after application, since the product is water-based.

Instructions for use:TEKNOCILA 400 is ready for use, applied to surfaces that have been completely cured.

It is applied with a brush, roller, sponge or sprayer in two layers. Mix the product before use! The application tools should be rinsed with water immediately after use. The ambient and surface temperature for application must be at least 5 °C during application and for the next 24 hours.

Application Notes/Limitations:

May cause irritation in contact with the skin. Protective gloves and safety glasses should be used.
In case of contact with eyes, rinse eyes immediately with warm water and seek medical help.
For water resistance, more than 2 layers should be applied.

Colour	White liquid
Density	1.03±0.03 g/cm³
Structure	Acrylic-based emulsion
Packaging	Metal buckets of 10 l and 30 liters
Expiration date	12 months in the closed original packaging
Drying time	Complete drying and curing: 7 days Pause between applying layers: 2 - 3 hours
Application temperature range	+5°C...+35°C
Expenditure	O,1 - 0.15 l/m²