Supports for fittings
Monolithic frame construction remains one of the popular technologies of civil and industrial construction. Due to its reliability and durability, buildings of this type are widely used as residential premises, office centers and industrial facilities. The peculiarity of such structures is that the supporting structures are inextricably linked and made of reinforced concrete. Further operational characteristics of the building largely depend on the quality and correctness of reinforcement and pouring of concrete.
In accordance with the technology of laying the reinforcement frame and the construction of the formwork, which can be easily constructed with the help of spring clamps, it is necessary to use reinforcement clamps and a protective pipe for the coupling screw.
Chiroses allow you to fix shuttering boards made of plywood and timber without the use of tie screws and nuts, with the teeth of your disk mechanism.
The chiroz is worn on any armature with a diameter of 6, 8 and 10 mm. The latter is pressed with a special key, then a reinforcing frame is laid, into which concrete is poured.
Rebar retainers are used for the correct location and reliable fixation of rebar bars. They can be installed on both rigid and soft bases in horizontal and vertical planes.
Depending on this , they are divided into:
A well-calculated location of the fixators will allow you to pour a homogeneous concrete coating, maintaining a uniform distance between the reinforcing bars over the entire filling area, thereby ensuring the strength and durability of the monolithic structure.
Plastic rebar retainers do not react with the composition of concrete, do not cause corrosion of the rebar and do not destroy the integrity of the monolith. They are simple and convenient to use. They do not require the use of additional tools or the involvement of qualified workers.
