Repair mixes for concrete
Buildings and structures that were built in an unfavorable environment without proper waterproofing, that have already exceeded operational deadlines or those that have been influenced by external aggressive factors, often lose their appearance and strength. As a result, these objects, or part of them, lose their functional characteristics, limit or completely cease to fulfill their purpose. Very often, the reason for the rapid wear of building structures is the mistakes made in the construction of a particular structure. Improper laying of concrete, installation of formwork and insufficient waterproofing lead to the destruction of the material under the influence of pressure, temperature, moisture and acids.
The solution to such problems often comes down to replacing constructs. But such a panacea does not always "cure" all the problems associated with the partial destruction of building elements. In most cases, replacement is not possible, and it is necessary to look for an alternative solution that will save labor and financial costs.
One of the proven manufacturers on the market of repair mixes is the Turkish company Tekno®, which develops and manufactures materials for repair, waterproofing and corrosion protection. All TEKNO repair mixes have been repeatedly tested and tested in practice by our customers.
Repair of floorsAs you know, most floors are made of concrete or reinforced concrete slabs.
Over time, the floor wears out, subsides or simply collapses. Another problem of the floors are the irregularities of the base, which is the cause of errors when filling it. It is impossible to lay any covering on such a floor, therefore it must be leveled. Floor leveling is a preparatory and very important stage of floor repair before laying the floor covering. Dry mixes are the most effective and fastest way to lay the leveling layer of the screed. To do this, we recommend using repair self—leveling injection molding materials - Teknogrout EX and Teknogrout 350.
Tekno® dry mixes are used for the repair of concrete and reinforced concrete horizontal structures. The materials provide not only leveling of the surface, but also its waterproofing, protection from aggressive environment and premature aging. After such finishing, the floor becomes smooth, smooth, without pores and cracks.
Cracks, potholes and chips appear on their surface.
In order to save the design and prevent their reappearance, defects must be eliminated immediately. Such a task can be easily solved with the help of repair non-shrinkable materials Teknorep 300 and Teknorep 300EX. Dry fast-hardening mixtures quickly gain strength when mixed with water. The applied mortar quickly hardens and firmly fills seams, cracks and other places of destruction of vertical concrete and reinforced concrete structures. The materials can be used for waterproofing wells, tunnels, basement waterproofing, etc.
Our company has a wide range of materials for construction and repair, in particular, we have a wide range of dry fast-hardening mixtures for the restoration and waterproofing of building structures. Learn more about these materials
You can find out from our specialists of the waterproofing department, call us, we will be happy to help: 0800 400 212 calls for free.
Additional products
Elastic polymer-cement waterproofing Teknomer 200 EX with high resistance to positive water pressure, 20kg + 10l
